What is the PVC pipe fitting weight?

Do you have experience with PVC pipes fittings? Many households now have PVC pipe fittings installed. Today this article will introduce you to the weight of PVC fittings.

 

PVC pipe fittings weight, this need according to the size of this pipe fittings, and the number of pipe fittings to measure weight, the size is different, the weight of the pipe fittings is not the same, the concrete weight is the actual weight, the general weight of the PVC plastic pipe fittings is to see the diameter and content of the content, how much specific specific gravity can be 1.5~1.7 The calculation is between 1 square meters and 1 millimeters thick, which is between 1.5~1.7 kilograms.

 

One of the most common things people are confused about is the size and measurement of it. PVC pipe fittings range in size from 1/8" to 24" or larger. Note: PVC pipe fittings up to 14 inches do not exactly match their nominal dimensions. So what type of PVC pipe fittings do you need, depending on your specific situation, then go to our website to select products.

 

The main effects of PVC pipe fittings are as follows:

1. ABS (acrylonitrile butadiene styrene copolymer)

·ABS is used to deliver drinking water, mud and chemicals. DWV (drain waste discharge) is the most commonly used application.

·Non plasticized polyvinyl chloride (UPVC) and CPVC (post chlorinated polyvinyl chloride)

·UPVC has excellent chemical resistance in the whole operating temperature range, and has a wide range of working pressure bands. Due to long-term high strength characteristics, stiffness and cost effectiveness, the UPVC system accounts for a considerable proportion of plastic pipe fittings installation.

·CPVC is resistant to various acids, bases, salts, alkanes, halogens and alcohols. It is not resistant to solvents, aromatics, and some chlorinated hydrocarbons.

 

2. PP (polypropylene)

Polypropylene is suitable for use in food, drinking water and ultra pure waters, as well as in pharmaceutical, chemical and other industries.

 

3. PE (polyethylene)

Polyethylene has been successfully used for years of safe transportation of drinking water and waste water, hazardous wastes and compressed gases.

 

Calculation of PVC pipe fittings weight and its size has a great relationship

The hard PVC tube has a nominal outer diameter of 50CM, but the soft PVC tube is usually 50mm.

Hard PVC tube specification: GB/T13020-1991

Soft PVC tube specification: GB/T135271-1992

The above is the introduction of the weight of PVC pipe fittings. I believe you have a better understanding of PVC pipes. If you have any questions, feel free to contact us through our official website. We are the manufacturer of PVC pipe fittings and welcome to know about our products.