What is the dimensions of 4 inches PVC elbow?

The diameter of PVC drainpipe is standard, and 4 inches is 110 pipe. They all talk about outer diameter, because this is matched with PVC fittings. Therefore, the diameter of the tube is unable to determine the thickness of the wall because it is the same. If you want to know the thickness of the pipe wall, simply take a vernier caliper to measure directly, or the diameter of the pipe minus the size of the aperture, and then divide it by 2 to get the result. As for the 4-inch pipe, the pipe wall is 3.2 mm, is produced according to national standards, also known as national standards, such as pipe wall: 2.1MM or 2.2MM, are produced according to enterprise standards, is the enterprise standard pipe, some also called rainwater pipe, distinguish drainage pipe.

The 110 PVC tube is 4 inch PVC tube and the diameter is marked. The inner diameter is marked. The connection of PVC pipe fittings with steel pipes and cast iron pipes is usually made by flange joints (above medium caliber specifications). The small caliber can be made by valve joints (socket bonding and external thread changing joints). The tooth end is joined by the same diameter joint of the metal pipe.

In the piping system, the PVC elbow is a pipe that changes the direction of the pipe. According to the angle, there are three most commonly used 45°、90° and 180°. In addition, according to the engineering needs, other abnormal angle elbows such as 60° are included. What is the length of the PVC pipe elbow?

The specifications of pvc pipe elbow are: 32mm, 40mm, 50mm, 75mm, 90mm, 110mm, 125mm, 160mm, 200mm, 250mm, 315mm, 400mm, 500mm, most PVC pipe specifications have a certain gap, this is normal The length of the PVC-U pipe is generally 4m or 6m, and other lengths are determined after negotiation between the supplier and the buyer.

There are many different specifications of the pvc pipe elbow, and the elbows of different angles are also very different in size. The pvc drain elbow size is generally 450*450pix, while the larger elbow size is 630*500pix. Of course, the specific problem needs specific analysis. The 90 degree elbow size is generally calculated according to the diameter of a known pipe, and the bending radius is often taken to be 1.5 times the diameter. Depending on the model, the 90 degree elbow size is different, and its length are also different.

For pvc pipe elbow, everyone has different special concerns about it, and what we do is to maximize the product requirements of each customer, so the quality of our pvc pipe elbow has been well received by many customers and enjoyed a good reputation in many countries. Taizhou Zhuoxin Plastics Co., Ltd. pvc pipe elbow have characteristic design & practical performance & competitive price, for more information on the pvc pipe elbow, please feel free to contact us.