Where is the PVC pipe transition joint used?

PVC pipe and PVC pipe coupling is considered to be the preferred pipe for the construction industry and is widely used in various fields such as drainage, wastewater, chemicals, heating fluids and coolants, food, ultrapure liquids, mud, gas, compressed air and vacuum systems. . The advantage is that other materials are unmatched, and corrosion resistance and resistance make it more widely used. Over-connection is a cable connector that interconnects two different types of cables. What is its function? So why choose PVC pipe transition joints instead of other materials?

The content list of this article:

What is it?

What effect does it have?

How is it connected?

Where is it good?

To sum up

What is it?

ThePVC pipe transition joint comprises a transition section of a tubular structure, one end of which is a socket end and the other end of which is a welded end. The inner wall of the socket end is provided with an annular groove, and the groove is provided with a special-shaped sealing ring. The socket end of the transition joint can be connected with the socket end of the PVC pipe, and the welded end can be hot melted or fused by the polyolefin pipe or pipe to introduce the polyolefin material pipe into the PVC pipe system. PVC transition joints have the characteristics of good sealing performance, high strength and long service life.

What effect does it have?

For aluminum and copper contact surface between two different metals were going to be readily oxidation (mainly the surface of the aluminum, because of different electronic activity of copper and aluminum), if pure is directly connected together with aluminum and copper material, Quickly, increased contact resistance, and then the vicious circle, then fever and contact resistance increases, eventually will be burnt., we need to use PVC transition joint to solve this problem.

How is it connected?

In the hydraulic joint, the hose joint is a joint that is fixed at both ends of the hose. The connection between the hose connector and the oil outlet of the component usually requires a transition joint. The transition joint acts as a transition between the hard pipe joint and the injector element, or directly as part of the hard pipe joint (so many manufacturers directly specify the transition joint as a hard pipe joint).

Where is it good?

— It has good tensile and compression strength

— Its fluid resistance is small, the wall is smooth, the fluid resistance is small, the roughness coefficient is only 0.009, its water capacity than the same diameter of cast iron pipe increased 20%, 40% higher than the concrete pipe.

— Excellent corrosion, and chemical resistance. Excellent acid, alkali, corrosion resistance, not affected by moisture and soil acidity, pipeline does not need any corrosion treatment.

— Good water tightness

— It prevents bites, is not a source of nutrition, and is not bitten by insects.

To sum up

When you want to buy a PVC pipe transition joint, but you are still hesitating, let's take a look at its advantages. I believe that you will choose it after you know it. Of course, you may not know which connector of which company to pick. After all, buying a good connector means that you can install your pipe successfully. If there is a problem with the connector, it may cause a lot of trouble. Our company's profession can be known as long as we know. We can provide you with professional services, quality products. If you have anything to ask, you can contact us and we will give you the best answer.